1. Welcome to kiwibox

    We're happy that you are part of our community. Please take a few minutes discover how kiwibox works.

    You want to explore kiwibox on your own? No problem. You can easily restart the tour at any time by using the sidebar if you change your mind.

  2. Logo

    A click on the kiwibox Logo brings you back to the startpage. Besides a menue with a lot of useful links opens if you mouse over.

  3. Notifications

    You may find all of your news, friendship requests and messages up right in the navigation bar.

  4. Settings

    Just mouse over a post and the gearwheel will appear. Here you'll find all the settings for your news.

  5. Supermodul

    The supermodul summarizes various contents. Enjoy exploring!


allautotool   , 32

from New York

Used BMW - How to Test Drive One

Driving a BMW is a little bit like learning all over again. By that I don't mean that they are completely wildly different to every other car on the market - just that to me their drive and balance is a deliciously different experience to the other more generic cars on the market. I find that German cars in particular are worth paying extra for, as they drive beautifully whilst still retaining that attitude and drive that they are so renowned for.

Of course, knowing that you personally like BMWs doesn't help you much in the car buying process. Sure, it may suggest an area of the market to start looking in, but it doesn't make it any clearer whether you would be best suited to a smart little hatchback or a huge SUV. Would you prefer a convertible or a saloon? What sized wheels do you want, how much pull do you need. These, unfortunately, are the things that are inspired by your passion, but have to be followed up with plain old fashioned research.

Part of that research needs to be taking a few cars out for a test drive. This shouldn't be reserved for your favourite model - you should take a selection out of differing brands so that you know exactly when thing to look out for and just what sort of car you prefer Autel MK808. This is the same whether you intend on buying a new or a used BMW - all cars need to be tested regardless of whether they are fresh off the production line!

To test drive a BMW autointhebox discount code, first do the obvious - book in at your local forecourt for a time, or walk in a try your luck to see if they can take you out in it there and then. As long as you are testing a new or used car from a dealership you should be insured, but always check your insurance if testing a private car - after all, the regulations for buying and selling in their market are pretty much nonexistent. They will also want to see your licence in order to drive it - so make sure you have it on you or it will be a wasted trip!

When you get in the BMW and start driving, you have to pay attention to plenty of things - especially so if you are trying out a used BMW not a new one. Pay attention to the breaks and suspension, noting any bumps and clonking noises, as well as how easily it changes gear. Any little annoying things you notice could reveal some terribly problems underneath, so don't ignore them so as not to make a fuss.

BMWs feel different to other cars, in my humble opinion, so make sure to test out a few just to make sure you have a frame of reference. Here you want to be paying attention to personal likes and preferences - do you like light steering, or do you prefer a more determined wiggle? Either way could make a difference to whether you love your new car - or hate it!

Pete J Ridgard is a writer and a car enthusiast. He currently writes for the automotive industry. Here he discusses Used BMW cars.
Related Links

Use of Aftermarket Caterpillar Forklifts Parts Could Increase the Life

Changing spares is a necessity but genuine spares come at a high price and this is a cause of concern for truck owners that use genuine spares only. Buying expensive spares would certainly help you in maintaining your vehicle for long time but they would eat your profit.

Which Caterpillar lift truck do you use? ItâEUR(TM)s a leading brand and this is evident from the ascending sales graph of this firm. Trucks it makes rule both indoors and outdoors. It has battery operated vehicles for indoor areas and gas and diesel engines for outdoors Autel MaxiDiag MD808. For Caterpillar forklifts parts, you could look at aftermarket dealers.

Every time a forklift is serviced, it needs some parts. Old and worn-out equipmentâEUR(TM)s are changed with new ones to keep the vehicle in good condition. You would need new set of tyre for your vehicle as soon as the present wheels become overused. Also you would need equipmentâEUR(TM)s used in engine after working the forklift for a certain time. Also you might need attachment to improve the functionality of your truck. In short, you would need changing the parts of your truck from time to time. ItâEUR(TM)s only with changing worn-out accessories with new ones that you would be able to use your truck for long time.

Changing spares is a necessity but genuine spares come at a high price and this is a cause of concern for truck owners that use genuine spares only. Buying expensive spares would certainly help you in maintaining your vehicle for long time but they would eat your profit. On the other hand, using aftermarket products is affordable. Forklift owners that use aftermarket equipment and accessories save lot of money and the money saved is added in the profit autel ds808.

Whether you are using a battery operated truck or it is an outdoor machine that runs on expensive fossil fuel, you could buy perfect Caterpillar forklifts parts for your truck from an aftermarket shop. There are many aftermarket stores on the web and each store has something different to offer. For instance some stores offer additional 5% discount on buying from their E-stores.

Buying a Caterpillar machine is a good decision because it is low on maintenance. Low maintenance machine could save you money and you could further save more money by using aftermarket Caterpillar forklifts parts in your truck. This is how other Caterpillar owners are maintaining their vehicles.

If you want to know more about the quality, affordability and availability of aftermarket Caterpillar forklifts parts then you should visit some aftermarket stores. Visiting these stores would provide you a good understanding on the manufacturing and supply of aftermarket spares. Take a decision on aftermarket accessories and equipment only after understanding their functionality.

Related Links

Universal Instructions on Installing a Quick Release Steering Wheel

Even if you just bought an aftermarket brand name quick release hub such as NRG, Momo, Sparco or JDM racing the majority of these products follow the same general principles of installation.

Learn the basic steps of properly adding a quick release steering hub to your vehicle.

Nobody detests car thieves more than the car owners themselves. Regrettably, it is far too often a common occurrence among owners of regular stock cars and especially modified car owners. There is basically not much a person can do short of spending hundreds of dollars to add the most sophisticated alarm system to their vehicle to deter thieves, but even that may not seem like enough sometimes. Fortunately, there are other simpler and less expensive methods to alleviate this growing problem. You don't have to just wait around hoping that you car won't be stolen. Simply invest into an aftermarket quick release steering wheel for your car. These generally fit most vehicles on the road today and it takes less time to install then it would take to wash and wax your entire car.

Before we dive into the general step by step procedures please note that this particular type of modification is only legal on vehicles that are not originally equipped with an airbag or that are for off-road or exhibit/show purposes only Autel MaxiPRO MP808TS.

Firstly, to install a quick release hub into your vehicle you would need to refer to your manual to find instructions on how to remove your stock wheel. Then disconnect the car battery and remove the horn button so that you can reach the steering hub bolt. A regular socket wrench or lug-nut crossbar can be utilized to loosen the bolt. Once the main bolt has been removed you should be able to take the steering wheel right off of the steering column. An important thing to know here is to remember the original alignment of your steering wheel. This is important since you will need to put it back into the exact position when you attempt to reassemble it. The worse thing to happen is that you forget and then your alignment is off which will affect the safety of your vehicle.

Whether you need to install an adapter plate or not to your quick release hub is contingent on what type and brand of aftermarket steering wheel that you own. A good way to check is to see if any of your Allen screw holes line up properly when you try to put your steering wheel onto your hub. Once everything is properly aligned you can tighten the Allen screws to finish this particular step of the installation process.

The next step is to attach the quick release steering hub directly onto the vehicle's steering column and securely tighten it down with the main steering hub bolt. When doing this it is critical that the wheel itself is properly positioned to prevent any problems with alignment.

Fasten 1/2 of the hub plate to the farthest end of the hub, and tighten it down securely with the Allen screws. This particular hub plate will be the actual point which the quick release hub plate will attach to. Anchor the ground wire of the vehicle's horn button to this plate as well. Afterwards you would need to fasten the other half of the hub plate that belongs with the car's steering wheel.
Line up the Allen screw holes together beginning from the steering wheel all the way to the hub plate Autel MaxiTPMS PAD. Then fasten the steering wheel down with Allen screws. Thoroughly inspect the steering wheel alignment again to make sure that everything is in their proper locations. Now you can attach the ground wire of the vehicle's horn button and push the horn button into position.

Now that your quick release steering wheel is installed you can complete the final step by testing it. You should be able to use the included keys to lock and unlock the quick release hub and depress the release tabs to remove your steering wheel. Again, these are general steps which we have provided for the majority of major aftermarket brand name quick release steering hub products on the market today but we still recommend that you consult not only your vehicle's manuals but also the detailed instructions of the product which you have purchased before attempting to perform the installation yourself.

Related Links

Understanding the Basics of a Manual Transmission

What causes the grinding noise when you shift gears? How does your car recognize the gears when you move the shift knob? What happens if you skip gears, or throw your vehicle into reverse while traveling forward at 60 mph? If you're driving a car equipped with a manual transmission, you may have asked yourself these questions at some point. We'll clarify these issues below by taking a brief tour through this assembly. We'll begin by looking at the reason your vehicle needs a transmission in the first place.

The Role Of Your Transmission

In an internal combustion engine, the valves and piston (and by extension, the crankshaft and other parts) work in unison to move your vehicle forward. If your engine only had a single gear, its rpms would increase with your car's speed. The problem is, your engine has an optimum rpm range in which it performs efficiently to generate horsepower; outside that range, it loses its efficiency. If the rpms continue to climb, your engine will "redline," which means it's on the verge of failing.

Your tranny prevents this from happening. It allows the ratio between the rate at which your engine operates and the rotation of your drive wheels to change with your speed. When you move the gear selector through the characteristic "H" pattern Autel MaxiSys MS906BT, you're essentially preventing your engine from redlining.

Most cars with a "stick shift" (that is, equipped with a manual transmission) have five gears. Moving the shift knob changes the gears.

Going Through The Gears

When you press down on the clutch pedal, your engine disengages from your transmission. This allows the engine to idle without your being forced to turn it off - for example, while you're waiting at a red traffic light. Releasing this pedal reconnects the two assemblies.

A shaft extends from your engine to one of many gears on your tranny. This gear connects to another gear through interlocking teeth. This second gear is connected to a layshaft, which is attached to additional gears. These other gears, in turn, are each connected to one of the five gears of your manual transmission.

These five gears are connected to another shaft, which is connected to your vehicle's differential. Also, the five gears are separated by a series of collars (usually three of them); these, too, are connected to this shaft.

As your engine turns, the connecting shaft also turns, which cause the layshaft to turn. As the layshaft turns, the interlocking teeth of its connected gears cause the five main gears to turn. Meanwhile, the collars located between the five gears are engaged by a gear selector fork. This fork is controlled through your shift knob. As you move the shift knob through the "H" pattern, the fork engages one of the collars based on the specific gear you select. This causes the collar to connect to the corresponding gear, which then turns the differential, and ultimately, the drive shaft.

Clarifying The Potential For Problems

So, what causes the grinding sound when you shift gears? Each collar is equipped with dog teeth. These teeth allow the collar to connect to the gears on the differential. Many people believe the grinding noise is caused by the gears' teeth connecting improperly. This is a common misconception Autel MaxiDiag MD808. In reality, the noise is caused by the dog teeth failing to find the proper fit in the differential gears.

What about putting the transmission into reverse while traveling at 60 mph? This would be impossible due to an idler gear that sits between the reverse gear and the layshaft gear. The reverse gear rotates in a direction that is opposite the other differential gears, and the idler gear prevents the layshaft gear from engaging it directly. Hence, you'll hear a loud noise, but there's no need to worry about accidentally destroying your transmission in this way.

Ultimately, your manual transmission is very similar to an automatic. The main difference is that you control the gear selector fork with the shift knob.

For all your auto body parts and used transmissions needs visit the leader in parts Everdrive.com
Related Links

Ultimate GPS Guide

If you're new to the GPS game and you have no idea what to look for, I'm going to make it a little easier to hopefully let you find out what you want. If you feel you're not great with technology, don't worry about it! In fact, most people aren't that great when it comes to new things but when it comes to GPS systems, most of them are user friendly.

Looking at the friendliness - The first thing we want to look at is how friendly this GPS is for you. I would go to a local electronic store and test out the GPS units they have on display Autel MaxiPRO MP808TS. Play with the buttons, ask questions and see which one you like. You won't want to get one that's complicated if you're not familiar with them. When you find one you like, don't buy it just yet because you'll want to research the price online before you actually buy it.

Check out the options - The more you pay, the more options you're going to get. For example, a $400 unit is going to come with many options like voice recognition, traffic details, gas prices in your area and more. If you only spend around $100, you're not going to get any of this. The question you want to ask yourself is if you want all of these options.

The screen size - You wouldn't think the screen size is an important factor but it really is. If you're getting older and have bad eyesight, you're going to want to check out the screen while driving. You wouldn't want to squint while driving or look up close; this is just calling for disaster! Always make sure you get a device that has a screen that's good to view.

Is it portable? Are you looking to get a portable GPS or one you can install in your car? If you're going to ask me first, I'd say portable because you can take it car to car and it's cheaper. With a GPS unit that's going to be installed, you're looking at labor fees and the price is going to be a little bit more. When you do get a portable unit, make sure that you get the accessories that are recommended because you won't be able to mount it if you don't get them.

Look at the reviews online - The last thing you want to do is look for reviews online. The reason you'll want to look for reviews is because like anything, you want to make sure other people are happy with it. Go to major retailer websites and look at the star ratings. The higher the ratings are, the more likely I would purchase it.

With so many GPS units on the market, make sure that you follow the tips above to get the one you want. Most of the GPS units on the market are going to range anywhere from $99-$500 autointhebox discount code. Check out your local retailer online and offline and hopefully you'll find the unit you're looking for!

Find a car GPS system at FINDgascards.com/blog, where you can find GPS reviews, information and more of Tom's work.
Related Links