1. Welcome to kiwibox

    We're happy that you are part of our community. Please take a few minutes discover how kiwibox works.

    You want to explore kiwibox on your own? No problem. You can easily restart the tour at any time by using the sidebar if you change your mind.

  2. Logo

    A click on the kiwibox Logo brings you back to the startpage. Besides a menue with a lot of useful links opens if you mouse over.

  3. Notifications

    You may find all of your news, friendship requests and messages up right in the navigation bar.

  4. Settings

    Just mouse over a post and the gearwheel will appear. Here you'll find all the settings for your news.

  5. Supermodul

    The supermodul summarizes various contents. Enjoy exploring!


breezygimm640   , 44

from Gallup SW Indian Foun


11 Steps to Spray Paint Your Car Like the Professionals - Car Bodywork Paint Repair

You'll be surprised to see only the best way to spray auto paint really can be easy. That does not mean that you go at it and can just grab a tin of paint. There are some fundamentals you need to know. Both in application and the preparation.

Step A:

Prepare by assembling all your items that you are going to need. Be sure your surrounding area is protected against any possible finished spray.

Step B:

You'll need to analyze the car for any rough spots. It also lets the spray automobile paint to adhere better. After you have finished sanding, ensure all of the dust soil and debris are taken off the vehicle. It is critical the automobile be absolutely clean.

Step C:

You will need to apply a primer. This will make sure that you get an overall even layer of your coloured paint plus helps the paint to adhere well. When you spray on the primer, be sure to apply light coats and allow for drying in between. The best way to spray auto paint takes a little getting used to.

Step D:

Now you are well to the point at which you are about ready to spray the color. You may have determined to use the spray auto paint that comes in aerosol cans, or perhaps you have chosen for the spray gun. In any case, make a few practice strokes on an item before you start with the auto. Once you might be ready, begin the passes with the paint without reluctance. If you hold gun or the spray can in one area, you may get uneven coverage and maybe the paint will run. If this happens you have an important repair job on your had. You will most likely have directions regarding how exactly to spray auto paint using the gear or spray cans.

Step E:

Check with someone which is familiar with how to spray car paint, or you may want to research this option on the internet

Step F:


You are down to the finishing touches, once you are completely satisfied with the shade. You may now need to apply several clear coatings. This can give the finished and shine look to the car as well as protect the finish. It's going to be up to you although likely two layers will be adequate. Make absolutely certain it's dry in between coats.

Step G:

Once again, you have the alternative of wet sanding if you favor. Again, it is suggested you ask the advice of people that are familiar with the way to spray paint a car. If you determine to follow this measure subsequently you need to wet sand with the following grits in this order. This Alloy Wheel Repair Enfield will remove spots which will be overly heavy in the clear coat application.

Step H:

Now you'll desire to using a rubbing compound to buff the surface in order to use a 2000 grit to remove any scrapes.

Step I:

You should buff the surface. To do this just use a medium cut polish.

Step J:

As a final touch, you may want to apply a few layers of wax.