1. Welcome to kiwibox

    We're happy that you are part of our community. Please take a few minutes discover how kiwibox works.

    You want to explore kiwibox on your own? No problem. You can easily restart the tour at any time by using the sidebar if you change your mind.

  2. Logo

    A click on the kiwibox Logo brings you back to the startpage. Besides a menue with a lot of useful links opens if you mouse over.

  3. Notifications

    You may find all of your news, friendship requests and messages up right in the navigation bar.

  4. Settings

    Just mouse over a post and the gearwheel will appear. Here you'll find all the settings for your news.

  5. Supermodul

    The supermodul summarizes various contents. Enjoy exploring!

humorthroat97

humorthroat97   , 62

from Long Green

Statistics

top activities To Do whenever Your vehicle's Check motor Light continues On

Oil tank - You will need to keep air, or dampness for that matter, from your own oil tank to avoid rusting/corrosion. Fill your tank towards brim plus some additive to avoid explosion. Should you this, your bicycle should start without a hitch.

Ok, therefore now everyone understands what an ECM is, now you must to replace it on a car or truck. For this, follow the instructions below and there must be no dilemmas about replacing it.

If http://carcomputerexchange.com/dodge/durango/cat_13.html (VE) is too high, or too low, then we have a challenge using the technical percentage of the motor, or an issue reporting airflow (i.e. MAF sensor). Normally aspirated engines generally speaking produce an engine load value of 80per cent to 90%. The sole time that the "load" PID is accurate when it comes to calculating VE is if the throttle is fully open. During a test drive, open the throttle entirely and record the "load" value regarding scan device. If the value is greater, or reduced, compared to the 80per cent to 90per cent range you have got a problem.

The Chrysler PT Cruiser ECU may have a really distinctive look about any of it. The control product isn't really a computer, as many individuals would assume, it is simply a metal package. This steel field will determine between 6 and 8 ins in length, it will have about four to six ins wide, and can simply be roughly an inch thick. If this isn't enough to be on then owners of this Chrysler will find it is supposed to be mounted on a thick conduit line. This dense conduit line will likely then be connected to the framework of vehicle and certainly will have plenty of cables appearing out of it.

The interior happens to be reshuffled in 2008, though it could took an owner of this earlier automobile to understand the distinction. Soft-touch areas abound. Perhaps the dash has a lightly padded feel. Top models including the 3.0R have electroluminescent dials. The audio system was irritating, changing the tuner knob with a band selector, then leaving channel selection to a four-way toggle. Maybe not unlearnable, but why reinvent the radio? The twin automated heat controls worked well after we unearthed that for convenience the temperature needed to be set cooler than it seemed it must be.

You are going to need to determine width, height, and level for the new motor along with the motor mounts, but most modern engines are much smaller compared to the twenty yr old diesel you will be removing. The actual only real time size happens to be a challenge has is when we eliminate a tiny motor and change it with a much bigger model. The popular Perkins 4-108 is now changed by a Yanmar that's about 2/3rds the size of the original. The 56hp Yanmar is about similar size as Perkins 4-108 offering very nearly half again the horsepower.

The truck stumbled on my shop aided by the motor operating very rough only when warmed up. It absolutely was tuned up lower than 6 months prior. Used to do notice a brand new alternator had been set up rather than by me personally. We remembered the customer had explained he was on vacation a month ago and had it installed as it failed while traveling. We inspected the primary and additional ignition system for signs of failure. These systems examined fine. I installed my scan tool to recover any service codes, there where none. We went both a "key on engine off" and "key on motor running" self tests with my scanner. No codes in which retrieved. Then I went to information stream mode and observed the critical ecm computer inputs and outputs. All readings showed up normal with the exception of the upstream O2 sensors; both showing "fixed rich".

It isn't constantly as simple as parking your bike on a warm corner of your garage, covering it and walking away. Here are a few recommendations on how you should park your bike to avoid damaging your tires, and any other element of your bike.