1. Welcome to kiwibox

    We're happy that you are part of our community. Please take a few minutes discover how kiwibox works.

    You want to explore kiwibox on your own? No problem. You can easily restart the tour at any time by using the sidebar if you change your mind.

  2. Logo

    A click on the kiwibox Logo brings you back to the startpage. Besides a menue with a lot of useful links opens if you mouse over.

  3. Notifications

    You may find all of your news, friendship requests and messages up right in the navigation bar.

  4. Settings

    Just mouse over a post and the gearwheel will appear. Here you'll find all the settings for your news.

  5. Supermodul

    The supermodul summarizes various contents. Enjoy exploring!

latedemogr295

latedemogr295   , 44

from Iron Ridge

Statistics

11 Steps to Spray Paint Your Car Like the Professionals - Automobile Bodywork Paint Repair

11 Measures to Spray Paint Your Car Like the Professionals - Automobile Bodywork Paint Repair

You may be surprised to see only the best way to spray car paint really can be easy. That does not mean that you can simply grab a tin of paint and go at it. There are some fundamentals you should know. Both in the Alloy Wheel Refurb Essex preparation and application.

Step A:

Prepare by gathering all your items that you're going to need. For other regions cover nicely with paper and masking tape.

Step B:

5987100388128455642.jpg

You may need to examine the car carefully. These will have to be sanded with 300 grit sand paper. It also enables the spray automobile paint to stick better. Make certain all of the dust soil and debris are removed from the vehicle once you have finished sanding. It is imperative that the automobile be totally clean.

Measure C:

This will make sure that you get an overall even coating of your coloured paint plus helps the paint to stick nicely. Be sure you allow for drying in between and apply light coats when you spray the primer. The way to spray auto paint requires a little getting used to.

Step D:

Now you are well to the point at which you are about ready to spray on the color. You may have determined to use the spray car paint that comes in aerosol cans, or perhaps you've selected for the spray gun. In either case, make a couple of practice strokes on an item before you start with the automobile. After you are ready, begin the passes with the paint without hesitation. If you hold gun or the spray can in one area, you may end up with uneven coverage and possibly the paint will run. Should this happen you have a major repair job on your had. You'll most likely have directions as to how to spray car paint using the spray or equipment cans.

Step E:

It's up to you whether you want to wet sand between coats of primer and colour paints. You may want to research this option on the internet, or check with someone that is comfortable with the way to spray auto paint

Step F:

Once you are totally satisfied with the color, you're down to the finishing touches. You may now want to apply several coats that are clear. This will give the finished and gloss look to the auto along with protect the finish. Likely two coats will be adequate but it'll be up to you personally. Make absolutely certain it is dry in between coats.

Step G:

If you prefer yet again, you have the alternative of wet sanding. Again, I would recommend you request the advice of people which are comfortable with the way to paint a car. You need to wet sand with the following grits in this order if you decide to follow this step then. Use 800, 1000, 1200, 1500 and the finally the 2000. This will remove spots that may be overly heavy in the clear coating application.

Step H:

Step I:

You should now buff the surface. To try this simply use a moderate cut polish.

Step J:

As a final touch, you might want to apply a few layers of wax.