1. Welcome to kiwibox

    We're happy that you are part of our community. Please take a few minutes discover how kiwibox works.

    You want to explore kiwibox on your own? No problem. You can easily restart the tour at any time by using the sidebar if you change your mind.

  2. Logo

    A click on the kiwibox Logo brings you back to the startpage. Besides a menue with a lot of useful links opens if you mouse over.

  3. Notifications

    You may find all of your news, friendship requests and messages up right in the navigation bar.

  4. Settings

    Just mouse over a post and the gearwheel will appear. Here you'll find all the settings for your news.

  5. Supermodul

    The supermodul summarizes various contents. Enjoy exploring!


umerfarooque   , 20

from Hato Rey


Just how to Shine Your Car Bodywork the Proper Way - Vehicle Body Polishing

It isn't the equipment which can be found in a job making it great or bad, oahu is the individual applying those methods, the tech who makes the difference. In car polishing an excellent technician could make that end look better than when you ordered the vehicle, and you wouldn't think hard about how exactly curso de mecanica automotiva​ that, but in that short report, I will go over some details that specialists know, or must know.

The key problems in regards to automobile concluding are things such as paint runs, sags, dust nibs and just common polishing in general. To start with, make sure that the finish is dry in accordance with the data from the product sheet as disappointment to get this done could damage the finish, making the whole job very costly.

The Appropriate Method to Shine:
When using a polish, make sure it is specifically or may be used for urethane finishes and maybe not lacquer finishes. When sanding, ensure that you use the finer 1000grit report, as class resolution sandpaper may ruin a finish.

The polisher rate must be set at 1200 - 1700 rpm's to ensure the most useful result. It is also very important to make sure that you're utilising the right form of station when you start. To understand what the very best station types, check always the item knowledge sheets and they'll steer you in the right path, remember, if in uncertainty, check always the sheet.

On the blend sides when you are, polishing make sure you work from the side
and never into it. The absolute most proposed method for a blend side is to hand glaze rather than device polish. If you have handy glaze, generally a material that's not hard and make certain it's clean for equally the application form and when getting the glaze off.

Getting Eliminate Of Flaws:
Much like polishing, always check with the right manufacturers item information page before sanding, or polishing, this provides you with the suggested dry times before polishing. Always be sure that before you start any work on the surface that you remove trash and material. If this is not performed, the results will be expensive and catastrophic.

It's so important that the appropriate prep function be performed so your surface is: Free of flaws like soil nibs. You should use 1500 or better grit for damp sanding to remove these. To ensure you will find no further flaws on the surface, mud the surface with a block sander, certainly not the entire surface, spot sanding can do.

The Last Step:
Utilize the polisher lightly to remove sand scratches utilizing the correct water polish. While using the polisher, set it to 1200 - 1700 rpm and work with a wool station first. Next, you will have to work with a foam pad. Eventually, you will need a non- harsh glaze. Remember that if you are in doubt about what to use or how to accomplish it, consult the manufacturer's listing of training and data information sheet.Don't be in a rush, if you invest some time you won't make the mistakes that you will only regret.